Oil heat got expensive this autumn. EIA's weekly survey put residential heating oil at $6.14 a gallon on November 2, 2026, up $2.51 from a year earlier, and EIA expects oil-heated homes to spend about 21% more this winter, the largest increase of any heating fuel. About 3% of US homes heat with oil, and most of them are in the Northeast. This guide does the cost math state by state with those prices, shows where the answer depends on your electricity rate, and explains what an oil-to-heat-pump quote should include.
We do not sell heat pumps or heating oil. We help you check a fuel-switch quote before you sign it.
Quick answer
- Oil heat now costs about $54 to $57 per million Btu of delivered heat in the Northeast, from an 80%-efficient boiler or furnace at EIA's November 2 prices.
- Heat pump heat costs about $26 to $38 per million Btu at a seasonal COP of 2.5 and each state's August 2026 electricity price.
- Break-even COP is 1.2 to 1.7. Above that, the heat pump is cheaper per unit of heat. Cold-climate heat pumps typically run a COP of about 1.8 to 2.5 even at 5°F.
- Per 100 gallons of oil replaced: about $180 saved in Maine, $220 in Massachusetts, $260 in New York, $280 in Connecticut and $310 in New Jersey or Pennsylvania.
- The risk is the oil price. Oil would have to fall to about $2.80 to $4.20 a gallon, depending on the state, before it beats a heat pump at COP 2.5. A year ago it averaged about $3.63.
- Rebates for leaving oil are some of the largest available: up to $7,000 to $14,000 under NYS Clean Heat when the old system is decommissioned, and $1,500 per ton up to $10,000 in Connecticut.
Oil vs heat pump running cost by state
Prices: residential heating oil from EIA's Heating Oil and Propane Update, week of November 2, 2026; residential electricity from EIA's Electric Power Monthly, August 2026 (the latest month published). Oil heat assumes an 80%-efficient boiler or furnace and 138,500 Btu per gallon. Heat pump heat assumes a seasonal COP of 2.5.
| State | Heating oil ($/gal) | Electricity (¢/kWh) | Oil heat ($/MMBtu) | Heat pump at COP 2.5 ($/MMBtu) | Heat pump at COP 3.0 ($/MMBtu) | Break-even COP | 100 gal of oil | Same heat by heat pump |
|---|
| Connecticut | $5.99 | 24.51 | $54 | $29 | $24 | 1.33 | $599 | $318 |
| Maine | $5.98 | 32.11 | $54 | $38 | $31 | 1.74 | $598 | $417 |
| Massachusetts | $6.18 | 30.48 | $56 | $36 | $30 | 1.60 | $618 | $396 |
| New Hampshire | $6.06 | 27.64 | $55 | $32 | $27 | 1.48 | $606 | $359 |
| Rhode Island | $6.21 | 28.18 | $56 | $33 | $28 | 1.47 | $620 | $366 |
| Vermont | $6.07 | 23.84 | $55 | $28 | $23 | 1.28 | $607 | $310 |
| New York | $6.32 | 28.65 | $57 | $34 | $28 | 1.47 | $632 | $372 |
| New Jersey | $6.30 | 24.61 | $57 | $29 | $24 | 1.27 | $630 | $320 |
| Pennsylvania | $5.93 | 21.77 | $53 | $26 | $21 | 1.19 | $593 | $283 |
"Same heat by heat pump" is the electricity cost to deliver the heat that 100 gallons of oil delivers at 80% efficiency: about 1,300 kWh at a COP of 2.5. Multiply by your own annual gallons divided by 100 for a rough yearly figure.
How to read the break-even COP
The break-even COP is the efficiency at which a heat pump costs exactly as much as oil per unit of heat. In Maine, with the highest electricity price in the table, it is 1.74. In Pennsylvania it is 1.19.
Heat pump efficiency falls as it gets colder, but cold-climate models stay above those numbers. Typical COP ranges for cold-climate units are about 2.8 to 3.6 at 35°F, 2.1 to 2.9 at 17°F and 1.8 to 2.5 at 5°F; see heat pump efficiency by temperature. So at current prices, a properly sized cold-climate heat pump is cheaper than oil on almost every hour of the heating season, not only on mild days. A standard heat pump that drops toward a COP of 1.4 at 5°F can lose that advantage on the coldest nights, which is one reason to insist on a cold-climate model in the Northeast.
What could change the answer
- Oil prices. Heating oil is not rate-regulated, and EIA notes that wholesale changes reach customers quickly. Oil would have to fall to about $3.10 to $3.20 a gallon in Vermont, Connecticut or New Jersey, $3.60 to $3.70 in New Hampshire, Rhode Island or New York, $3.96 in Massachusetts and $4.17 in Maine before it beats a heat pump averaging COP 2.5. The national average a year ago was about $3.63.
- Winter electricity rates. The electricity prices above are August averages. Several New England utilities change supply rates for the winter, so check the rate on your own bill for December to March.
- Your old system's efficiency. An older oil boiler running below 80% makes the heat pump look better; a newer one at 85% to 87% narrows the gap slightly.
- How the heat pump is sized and installed. A system that cannot carry the house at your design temperature will lean on backup heat. See heat pump sizing and Manual J and backup heat.
Heat Pump Guide
Want a second read on the quote?
Paste the proposal or upload the PDF. No lead auction.
Free. No sales pitch. Personal reply in ~2 business days.
Still researching? Send me the guide
What switching costs, and the rebates for leaving oil
A whole-home heat pump costs about $20,000 installed: the median across 4,085 recent market-rate installs we analyzed was $20,418, with half between $16,754 and $26,214. See the full breakdown in the real cost of a heat pump. Those projects replaced gas furnaces in California, so an oil conversion in an older Northeast house with a boiler and no ducts may differ.
Oil-to-heat-pump conversions qualify for some of the largest incentives in the country:
| State | Incentive for replacing oil | Detail |
|---|
| New York | $7,000 to $14,000 single-family when the oil system is decommissioned; $4,000 to $10,000 if it stays as integrated backup (upstate) | NYS Clean Heat by utility |
| Connecticut | $1,500 per ton up to $10,000, if the oil system is removed or integrated with a listed control | Energize CT |
| Maine | $1,000 to $3,000 per outdoor unit depending on income | Efficiency Maine |
| Massachusetts | Mass Save whole-home rebates | Massachusetts cost and rebates |
There is no federal tax credit for equipment placed in service after December 31, 2025.
Keep the oil system as backup, or remove it?
Programs pay more when the oil system goes. NYS Clean Heat pays $7,000 upstate for a decommissioned system against $4,000 when the old system stays, and Connecticut pays $1,500 per ton only if the oil equipment is removed, disconnected, or tied in through a qualified integrated control. Keeping it can make sense in a large, leaky house or where the heat pump cannot carry the full load. If you keep it, the quote should name the integrated control and the outdoor temperature at which the oil system takes over.
What an oil-to-heat-pump quote should include
| Quote line | What it should say | Red flag |
|---|
| Sizing | Manual J heat loss at your design temperature | Tonnage copied from the old boiler's rating |
| Equipment | Cold-climate model, AHRI match, output at 5°F | A standard heat pump in a cold climate |
| Distribution | Ducts, ductless heads or air-to-water, room by room | "Whole home" with no plan for bedrooms |
| Oil system | Removed, disconnected, or integrated with a named control | Nothing said about the boiler or tank |
| Tank | Removal or abandonment, and who handles it | Tank left in place without a plan |
| Electrical | Panel capacity, new circuits, service upgrade if any | Electrical marked "by others" |
| Incentives | Program, amount, date checked, who receives it | A federal tax credit or an unconfirmed rebate |
FAQ
Is a heat pump cheaper to run than oil heat?
At November 2026 prices, yes, in every Northeast state we checked. Oil heat costs about $54 to $57 per million Btu; heat pump heat at a seasonal COP of 2.5 costs about $26 to $38.
How much will I save switching from oil to a heat pump?
Roughly $180 to $310 for every 100 gallons of oil you replace, depending on your state's electricity price. A house that burns 700 gallons a winter would save about $1,270 in Maine and about $2,180 in New Jersey at these prices, before maintenance and any change in cooling use.
What happens if oil prices fall?
The savings shrink. Oil would have to drop to about $2.80 to $4.20 a gallon, depending on the state, before it is cheaper than a heat pump running at a seasonal COP of 2.5. The national average a year ago was about $3.63.
Does a heat pump work in a cold Northeast winter?
Cold-climate models keep a COP of about 1.8 to 2.5 at 5°F, above the 1.2 to 1.7 break-even with oil at current prices. The key is sizing it to your home's heat loss at your local design temperature.
Should I remove my oil tank?
If the oil system is fully decommissioned, yes, the quote should cover removing or properly abandoning the tank. Rebate programs in New York and Connecticut pay more when the oil system is removed or disconnected.
What we could not verify
- Your winter electricity rate. EIA's latest state averages are for August 2026; winter rates can be higher in New England.
- Seasonal COP for your house. We used 2.5 and 3.0 as round assumptions within the typical cold-climate range. Real seasonal performance depends on equipment, sizing, ducts and climate.
- Installed cost for oil conversions specifically. The cost data we analyzed comes from California, where most homes replace gas furnaces.
- EIA's dollar forecast per household. EIA's Winter Fuels Outlook text gives the 21% increase; we did not read its expenditure table for this update.
Method and update note
Oil prices: EIA Heating Oil and Propane Update, residential heating oil, week of November 2, 2026. Electricity prices: EIA Electric Power Monthly, Table 5.6.A, residential, August 2026. Conversion: 138,500 Btu per gallon of heating oil and 3,412 Btu per kWh (EIA). Cost per million Btu delivered = price divided by (0.1385 MMBtu per gallon times 80% efficiency) for oil, and price times 293.07 kWh per MMBtu divided by COP for the heat pump. The previous version of this page gave no numbers; this rewrite replaces it.
Sources