Kitchen table with heat pump quote, calculator, utility bill, and outdoor unit visible through a window

Heat Pump Guide

Updated By Marcus Reed

Real Cost of a Heat Pump in 2026: 4,085 Installs Analyzed

What a heat pump costs installed, from 4,085 market-rate California installs in 2025-2026: median $20,418, and what ducts, size, region and speed add.

Budget

Quick answer: A whole-home heat pump costs about $20,000 installed. Across 4,085 market-rate single-family installs completed in California in 2025 and 2026, from the state's TECH Clean California program data, the median total project cost was $20,418 before incentives, and half of all projects fell between $16,754 and $26,214. A single-zone ductless mini-split ran a median $11,020. Replacing ducts added about $5,300 to the median, and a variable-speed system cost about $4,000 more than a two-stage one. System size mattered less than buyers expect: a 2-ton ducted job was $18,250 and a 5-ton job $21,699. The median has barely moved since 2023.

Best for

Homeowners budgeting for a heat pump, or checking whether a quote is in the normal range.

Wrong fit

Commercial buildings, new construction, or anyone who needs a price for one specific house. Only a site visit and a Manual J give you that.

Tradeoff

The median is a good sanity check, not a target. Ducts, the number of zones and the electrical work move a real quote far more than the brand or the tonnage.

Heat pump cost guides usually quote a wide range from contractor surveys. This one uses invoices. California's TECH Clean California program publishes the total project cost on every heat pump incentive application, which makes it the largest public record of what homeowners actually paid. We downloaded the working data set dated October 20, 2026 and analyzed the most recent installs. The figures are California prices, and California labor is not cheap, so treat them as a well-documented reference point rather than your local price.

We do not sell heat pumps or take a cut of installs. We help you check a quote before you sign it.

Quick answer

  • Typical whole-home install: median $20,418 before incentives, with half of projects between $16,754 and $26,214 (4,085 market-rate single-family installs, January 2025 to May 2026).
  • Ducted system: median $20,729. Single-zone ductless mini-split: $11,020. Multi-zone ductless: $20,157.
  • Per ton, ducted: median $6,544.
  • New ducts: projects that included duct replacement had a median of $25,599, about $5,300 more than those that did not.
  • Compressor: variable-speed ducted systems ran $20,923, two-stage $16,951.
  • Price trend: $16,992 in 2022, then flat at about $20,300 to $20,500 from 2023 to 2025.
  • Heat pump water heater: median $7,846 installed, almost all replacing gas.

How we got these numbers

TECH Clean California's single-family working data set records 67,878 heat pump installations from July 2021 to July 2026, each with the contractor-reported total project cost, which TECH defines as equipment and installation. We kept:

  • single-family homes with one system installed,
  • the program's market-rate projects, since income-qualified projects follow different pricing (1,463 of 2,358 recent income-qualified ductless jobs were reported at exactly $8,000 to $8,200),
  • installations completed from January 1, 2025 onward, the latest data available.

That leaves 4,085 heat pump HVAC projects and 4,300 heat pump water heaters. All figures are before incentives. Medians are used throughout because a handful of very large projects pull averages up.

Heat pump cost by system type

SystemProjectsMedian installed costMiddle half of projects
All heat pump HVAC4,085$20,418$16,754 to $26,214
Ducted split system2,873$20,048$16,857 to $25,442
Ducted packaged unit179$19,129$15,816 to $24,450
Ducted mini-split (concealed air handler)313$22,590$18,758 to $27,490
Ducted multi-split167$26,000$21,400 to $32,764
Ductless multi-zone mini-split282$20,157$14,946 to $26,259
Ductless single-zone mini-split136$11,020$8,000 to $14,000

The cheapest path is one ductless head for one zone. Once a ductless system serves several rooms, it costs about the same as a ducted whole-home system.

Does size change the price?

Less than most buyers expect. For ducted systems, installed in 2025 and 2026:

Cooling capacityProjectsMedian installed cost
2 tons397$18,250
2.5 tons260$20,887
3 tons1,307$20,158
3.5 tons194$19,897
4 tons888$21,480
5 tons499$21,699

Going from 2 to 5 tons added about $3,450 to the median. Labor, ductwork, electrical and removal of the old system are mostly fixed per job, which is why cost per ton falls as systems get bigger. That is also why oversizing a system to "be safe" is a poor trade: you pay a little more upfront and get a unit that short-cycles. Size from a Manual J, not from square footage. See our Manual J sizing guide.

Heat Pump Guide

Want a second read on the quote?

Paste the proposal or upload the PDF. No lead auction.

Free. No sales pitch. Personal reply in ~2 business days.

Still researching? Send me the guide

What adds the most to a quote

FactorWith itWithout itDifference in medians
Duct replacement$25,599$20,260about $5,300
Variable-speed vs two-stage compressor$20,923$16,951about $4,000
Electrical service upgrade$21,580$20,619about $1,000

These are differences between groups of real projects, not the price of the item itself, because projects that need new ducts or a service upgrade tend to differ in other ways too. Equipment made up a median 60% of the reported project cost on ducted jobs, so the remaining 40% is labor, materials, permits and the contractor's margin.

Almost every project in the data removed the old system: 4,037 of 4,085 recorded the furnace as fully decommissioned. Nearly all pulled a permit.

Cost by region in California

Region (ducted systems)ProjectsMedian installed cost
Central Valley182$22,666
Bay Area2,001$21,552
San Diego County237$21,552
Los Angeles County148$20,288
Sacramento region613$19,653
Orange County55$18,738
Inland Empire250$17,980
Central Coast111$17,500

Regional gaps are about $5,000 from cheapest to most expensive, smaller than the gap between a ducted job with and without new ducts.

Has heat pump pricing come down?

Not since 2023. Median market-rate project cost by year of installation:

YearProjectsMedian installed cost
20228,478$16,992
202311,489$20,450
202417,993$20,313
20253,976$20,409

The jump from 2022 to 2023 coincides with a shift toward variable-speed equipment: 67% of 2022 market-rate projects used a variable-speed compressor, against 80% in 2023 and 96% in 2025. Since 2023, prices have held flat. The number of market-rate projects drops sharply in 2025 and 2026; the median price per project did not change.

Heat pump water heaters

Market-rate heat pump water heaters installed in 2025 and 2026 had a median total project cost of $7,846, with half between $6,262 and $8,811. Almost all of the 4,300 projects replaced a gas water heater. Jobs that needed an electrical service upgrade ran a median $8,371, against $6,817 for those that did not. For rebates by state, see our heat pump water heater rebates guide.

What incentives covered

In the same market-rate HVAC projects, the median incentive the contractor received was $1,500, and half fell between $1,000 and $1,500, so most homeowners paid nearly the full price. Market-rate water heaters received a median $4,300. Statewide incentives have since largely run out; see what is still open in California. Rebates in other states depend on your utility: see New York, Connecticut, Maine and Oregon. There is no federal tax credit for equipment placed in service after December 31, 2025.

Outside California

We know of no other public data set that records installed heat pump prices job by job at this scale. SMUD, the Sacramento utility, publishes its own 12-month medians, and they match: $19,193 for a gas-to-electric conversion. Cold-climate states need equipment rated for low temperatures and often more capacity, which can push prices higher, but we have no comparable invoice data from those states, so we do not put a number on it.

Quote red flags

  • A whole-home price far above the middle range for your system type, with no line items for ducts, electrical or zoning to explain it.
  • A large system sized from square footage instead of a Manual J.
  • Duct replacement priced but not specified: which runs, what insulation value, and whether the return is enlarged.
  • An electrical service upgrade added without a load calculation showing it is needed.
  • Removal of the old furnace or boiler left out of the scope.
  • A federal tax credit subtracted from a 2026 price.

Questions to put in writing before signing

  1. What is the equipment cost, and what is labor, materials, electrical and permits?
  2. What Manual J load did you size the system to?
  3. Are any ducts being replaced, sealed or resized, and which?
  4. Is an electrical service upgrade required, and what calculation shows it?
  5. Is removal of the old system included?
  6. Which incentives does this price assume, and are they confirmed?

FAQ

How much does a heat pump cost to install in 2026?

About $20,000 for a whole-home system. The median across 4,085 market-rate California installs in 2025 and 2026 was $20,418, with half of projects between $16,754 and $26,214. A single-zone ductless mini-split was about $11,000.

How much does a heat pump cost per ton?

A median $6,544 per ton for ducted systems in the same data. Cost per ton falls as systems get bigger, because much of the job is fixed labor.

Is a ductless mini-split cheaper than a ducted heat pump?

For one zone, yes: a median $11,020. For a whole home with several ductless heads, no: multi-zone ductless systems ran a median $20,157, about the same as ducted.

How much do new ducts add?

Projects that included duct replacement had a median of $25,599, about $5,300 more than ducted projects that kept the existing ducts.

Are heat pump prices going down?

Not in this data. The median rose from $16,992 in 2022 to about $20,450 in 2023 and has stayed near that level through 2025.

What we could not verify

  • Prices outside California. The data covers California installs only. We did not find comparable public invoice data for other states.
  • What each line item costs. The data records total project cost and equipment cost, not separate prices for ducts, electrical work or permits, so the "what adds the most" table compares groups of projects rather than pricing each item.
  • Installs after May 2026. The newest market-rate install in the October 20, 2026 data set was completed May 11, 2026.

Method and update note

Source: TECH Clean California Working Data Set, Single-Family, dated October 20, 2026, downloaded November 10, 2026 from TECH's public data page. Filters: single-family buildings, one unit installed, a reported total project cost above zero, market-rate program projects, installation completed January 1, 2025 or later, unless a table says otherwise. Regions group counties: the Bay Area includes Alameda, Contra Costa, Marin, Napa, San Francisco, San Mateo, Santa Clara, Solano and Sonoma; the Sacramento region includes Sacramento, Placer, El Dorado and Yolo; the Inland Empire is Riverside and San Bernardino; the Central Valley includes Fresno, Kern, Tulare, Stanislaus, San Joaquin, Merced, Kings and Madera; the Central Coast includes Monterey, Santa Cruz, San Luis Obispo, Santa Barbara and San Benito. The previous version of this page gave only a generic range; this rewrite replaces it.

Sources

Methodology

These guides are built from public specifications, primary program pages, utility documentation, manufacturer materials, and repeated buyer questions that show up in quote and installation decisions.

Manufacturer and installer responses can clarify pricing bands, warranty terms, support footprint, and common mistakes. They do not move a page up the shortlist on their own.

Written by Marcus ReedReviewed by Heat Pump Guide Editorial Team, Editorial review on November 10, 2026How we reviewEditorial policy

Next Step

What to do next

Use one of these three paths. They are here to move the decision forward, not add more noise.

Want the full buyer path in your inbox? We send the short version.

Related Guides